Powered Industrial Truck Directives |
Directive |
Description |
CPL 02-01-028 |
Compliance Assistance for the
Powered Industrial Truck Operator Training Standards, (November 30, 2000),
17 pages. This instruction provides compliance assistance for the revised
powered industrial truck operator training standard. |
CPL 02-01-030 |
Chocking of Tractor Trailer under
the Powered Industrial Truck Standard (October 20, 1999), 7 pages. This
instruction establishes policy to ensure proper enforcement of
1910.178(k)(1) and 1910.178(m)(7). |
CPL 02-01-022 |
Logging Operations, Inspection Procedures and
Interpretive Guidance Including Twelve Previously Stayed Provisions
(9/27/96), 15 pages. |
CPL 02-01-019 |
Logging Operations, Inspection Procedures and Interpretive Guidance (March 17,
1995), 10 pages. Clarifies
the use of overhead guards for forklifts. |
STD 01-16-007 |
Electrical Safety-Related Work
Practices -- Inspection Procedures and Interpretation Guidelines (July 1,
1991), 12 pages. Employees using industrial trucks under overhead lines
must be trained on the electrical hazards involved. |
STD 01-05-019 |
1910.147, the Control of Hazardous
(Lockout/Tagout) - Inspection Procedures and Interpretive Guidance (September 11,
1990), 28 pages. References 1910.178, Powered Industrial Trucks
(q)(4), as including lockout/tagout requirements. |
STD 01-08-002 |
1910.151(c), Medical Services and
First Aid; 1926.50 and 1926.51, Medical Service and First Aid, and ... (March
8, 1982), 4 pages. Clarifies requirements for emergency eyewash and body
showers in battery charging and maintenance areas. |
STD 01-11-007 |
1910.178(k)(1); 1910.178(m)(7),
Mechanical Means to Secure Trucks or Trailers to a Loading Dock (August 5,
1981), 3 pages. This instruction allows the use of a mechanical means
which secures trucks or trailers to a loading dock in situations in which
they provide the equivalent protection of wheel chocks. |
STD 01-11-004 |
1910.178(g)(2), Battery Charging
Stations for Fork Lifts and Other Industrial Trucks (October 30, 1978), 2
pages. Clarifies the subject standard as it applies to "battery charging"
areas where power industrial truck batteries are charged only.
|
STD 01-11-003 |
1910.178(m)(b) Powered Industrial
Trucks; Truck Operations (October 30, 1978), 2 pages. Provides guidelines
when trucks use a door-opening device for opening or closing railroad
freight car doors. |
STD 01-11-006 |
STD 01-11-006 - STD
1-11.6A - Disparity Between 29 CFR 1910.178(c)(2)(vii) and Table N-1, 29
CFR 1910.178(c)(2). |