Department of Labor Seal photos representing the workforce - digital imagery? copyright 2001 photodisc, inc.
Department of Labor Seal www.osha.gov   MyOSHA [skip navigational links] Search    Advanced Search | A-Z Index
Directives
STD 01-03-002 - STD 1-3.2 - Hunt-Pierce Servi-Lift #9-271 Aerial Lift
Directives - Table of Contents Directives - Table of Contents
• Record Type: Instruction
• Directive Number: STD 01-03-002
• Old Directive Number: STD 1-3.2
• Title: Hunt-Pierce Servi-Lift #9-271 Aerial Lift
• Information Date: 03/21/1979
• Standard Number: 1910.67

OSHA Instruction STD 1-3.2 March 21, 1979 Office of Compliance Programming

H A Z A R D A L E R T

SUBJECT: Hunt-Pierce Servi-Lift #9-271 Aerial Lift

A. Purpose. This instruction requires that the six torque plate bolts which hold the torque plate that joins the upper and lower booms of the Servi-Lift must be in place and properly secured.

B. Scope. This instruction applies OSHA-wide.

C. Action. CSHO's during inspections shall ensure that any missing or loose torque plate bolts is a recognized hazard and shall be corrected immediately.

D. Background. It has been brought to OSHA's attention that a problem could exist for employees working in and around the Hunt-Pierce Servi-Lift #9-271 aerial lift. Serious accidents may occur because of inadequate and/or improper preventive maintenance routines coupled with insufficient daily inspections of the equipment by its operators and its maintenance team to insure safe operation.

Eula Bingham Assistant Secretary Occupational Safety and Health

DISTRIBUTION: National, Regional and Area Offices State Designees NIOSH Regional Program Directors

Directives - Table of Contents Directives - Table of Contents


Back to Top Back to Top http://www.osha.gov/index.html http://www.dol.gov/
Contact Us | Freedom of Information Act | Customer Survey
Privacy and Security Statement | Disclaimers
Occupational Safety & Health Administration
200 Constitution Avenue, NW
Washington, DC 20210