![]() OSHA 3143 ![]() U.S. Department of Labor Occupational Safety and Health Administration OSHA 3143 1998 (Revised) This informational booklet is intended to provide a generic, non-exhaustive overview of a particular standards-related topic. This publication does not itself alter or determine compliance responsibilities, which are set forth in OSHA standards themselves and the Occupational Safety and Health Act. Moreover, because interpretations and enforcement policy may change over time, for additional guidance on OSHA compliance requirements, the reader should consult current and administrative interpretations and decisions by the Occupational Safety and Health Review Commission and the Courts. Material contained in this publication is in the public domain and may be reproduced, fully or partially, without permission of the Federal government. Source credit is requested but not required.
This information will be made available to sensory impaired individuals upon request. Voice phone: (202) 219-8615; Telecommunications Device for the Deaf (TDD) message referral phone: 1-800-326-2577.
U. S. Department of Labor Occupational Safety and Health Administration OSHA 3143 Contents What
is Industrial Hygiene?
Chemical Hazards Biological Hazards Physical Hazards Ergonomic Hazards State Programs Free Onsite Consultation Voluntary Protection Programs Training and Education Electronic Information Emergencies States with Approved Plans OSHA Consultation Project Directory OSHA Area Offices OSHA Regional Offices What is Industrial Hygiene? Industrial hygiene is the science of anticipating, recognizing, evaluating, and controlling workplace conditions that may cause workers' injury or illness. Industrial hygienists use environmental monitoring and analytical methods to detect the extent of worker exposure and employ engineering, work practice controls, and other methods to control potential health hazards. There has been an awareness of industrial hygiene since antiquity. The environment and its relation to worker health was recognized as early as the fourth century BC when Hippocrates noted lead toxicity in the mining industry. In the first century AD, Pliny the Elder, a Roman scholar, perceived health risks to those working with zinc and sulfur. He devised a face mask made from an animal bladder to protect workers from exposure to dust and lead fumes. In the second century AD, the Greek physician, Galen, accurately described the pathology of lead poisoning and also recognized the hazardous exposures of copper miners to acid mists. In the Middle Ages, guilds worked at assisting sick workers and their families. In 1556 the German scholar, Agricola, advanced the science of industrial hygiene even further when, in his book De Re Metallica, he described the diseases of miners and prescribed preventive measures. The book included suggestions for mine ventilation and worker protection, discussed mining accidents, and described diseases associated with mining occupations such as silicosis. Industrial hygiene gained further respectability in 1700 when Bernardo Ramazzini, known as the "father of industrial medicine," published in Italy the first comprehensive book on industrial medicine, De Morbis Artificum Diatriba (The Diseases of Workmen). The book contained accurate descriptions of the occupational diseases of most of the workers of his time. Ramazzini greatly affected the future of industrial hygiene because he asserted that occupational diseases should be studied in the work environment rather than in hospital wards. Industrial hygiene received another major boost in 1743 when Ulrich Ellenborg published a pamphlet on occupational diseases and injuries among gold miners. Ellenborg also wrote about the toxicity of carbon monoxide, mercury, lead, and nitric acid. In England in the 18th century, Percival Pott, as a result of his findings on the insidious effects of soot on chimney sweepers, was a major force in getting the British Parliament to pass the Chimney-Sweepers Act of 1788. The passage of the English Factory Acts beginning in 1833 marked the first effective legislative acts in the field of industrial safety. The Acts, however, were intended to provide compensation for accidents rather than to control their causes. Later, various other European nations developed workers' compensation acts, which stimulated the adoption of increased factory safety precautions and the establishment of medical services within industrial plants. In the early 20th century in the U. S., Dr. Alice Hamilton, led efforts to improve industrial hygiene. She observed industrial conditions first hand and startled mine owners, factory managers, and state officials with evidence that there was a correlation between worker illness and their exposure to toxins. She also presented definitive proposals for eliminating unhealthful working conditions. At about the same time, U.S. federal and state agencies began investigating health conditions in industry. In 1908, the public's awareness of occupationally related diseases stimulated the passage of compensation acts for certain civil employees. States passed the first workers' compensation laws in 1911. And in 1913, the New York Department of Labor and the Ohio Department of Health established the first state industrial hygiene programs. All states enacted such legislation by 1948. In most states, there is some compensation coverage for workers contracting occupational diseases. The U.S. Congress has passed three landmark pieces of legislation
relating to safeguarding workers' health: (1) the Metal and Nonmetallic
Mines Safety Act of 1966, (2) the Federal Coal Mine Safety and
Health Act of 1969, and (3) the Occupational Safety and Health Act
of 1970 (Act). Today, nearly every employer is required to implement
the elements of an industrial hygiene and safety, occupational health, or
hazard communication program and to be responsive to the Occupational
Safety and Health Administration (OSHA) and the Act and its
regulations. ![]() How Are OSHA and Industrial Hygiene Related?
Under the Act, OSHA develops and sets mandatory occupational
safety and health requirements applicable to the more than 6 million
workplaces in the U.S. OSHA relies on, among many others, industrial
hygienists to evaluate jobs for potential health hazards. Developing and
setting mandatory occupational safety and health standards involves
determining the extent of employee exposure to hazards and deciding what
is needed to control these hazards, thereby protecting the workers.
Industrial hygienists, or IHs, are trained to anticipate, recognize,
evaluate, and recommend controls for environmental and physical hazards
that can affect the health and well-being of workers. More than 40 percent
of the OSHA compliance officers who inspect America's workplaces are
industrial hygienists. Industrial hygienists also play a major role in
developing and issuing OSHA standards to protect workers from health
hazards associated with toxic chemicals, biological hazards, and harmful
physical agents. They also provide technical assistance and support to the
agency's national and regional offices. OSHA also employs industrial
hygienists who assist in setting up field enforcement procedures, and who
issue technical interpretations of OSHA regulations and standards.
Industrial hygienists analyze, identify, and measure workplace hazards or
stressors that can cause sickness, impaired health, or significant
discomfort in workers through chemical, physical, ergonomic, or biological
exposures. Two roles of the OSHA industrial hygienist are to spot those
conditions and help eliminate or control them through appropriate
measures.
A worksite analysis is an essential first step that helps an industrial
hygienist determine what jobs and work stations are the sources of
potential problems. During the worksite analysis, the industrial hygienist
measures and identifies exposures, problem tasks, and risks. The most
effective worksite analyses include all jobs, operations, and work
activities. The industrial hygienist inspects, researches, or analyzes how
the particular chemicals or physical hazards at that worksite affect
worker health. If a situation hazardous to health is discovered, the
industrial hygienist recommends the appropriate corrective actions.
How do IH's Recognize and Control Hazards?
Industrial hygienists recognize that engineering, work practice, and
administrative controls are the primary means of reducing employee
exposure to occupational hazards. Engineering controls minimize employee
exposure by either reducing or removing the hazard at the source or
isolating the worker from the hazards.
Engineering controls include eliminating toxic chemicals and replacing
harmful toxic materials with less hazardous ones, enclosing work processes
or confining work operations, and installing general and local ventilation
systems.
Work practice controls alter the manner in which a task is performed.
Some fundamental and easily implemented work practice controls include (1)
following proper procedures that minimize exposures while operating
production and control equipment; (2) inspecting and maintaining process
and control equipment on a regular basis; (3) implementing good
house-keeping procedures; (4) providing good supervision and (5) mandating
that eating, drinking, smoking, chewing tobacco or gum, and applying
cosmetics in regulated areas be prohibited.
Administrative controls include controlling employees' exposure by
scheduling production and workers' tasks, or both, in ways that minimize
exposure levels. For example, the employer might schedule operations with
the highest exposure potential during periods when the fewest employees
are present.
When effective work practices and/or engineering controls are not
feasible to achieve the permissible exposure limit, or while such controls
are being instituted, and in emergencies, appropriate respiratory
equipment must be used. In addition, personal protective equipment such as
gloves, safety goggles, helmets, safety shoes, and protective clothing may
also be required. To be effective, personal protective equipment must be
individually selected, properly fitted and periodically refitted;
conscientiously and properly worn; regularly maintained; and replaced as
necessary.
What Are Some Examples of Job Hazards? To be effective in recognizing and evaluating on-the-job hazards and recommending controls, industrial hygienists must be familiar with the hazards' characteristics. Major job risks can include air contaminants, and chemical, biological, physical, and ergonomic hazards. Air Contaminants These are commonly classified as either particulate or gas and vapor contaminants. The most common particulate contaminants include dusts, fumes, mists, aerosols, and fibers. Dusts are solid particles that are formed or generated from solid organic or inorganic materials by reducing their size through mechanical processes such as crushing, grinding, drilling, abrading or blasting. Fumes are formed when material from a volatilized solid condenses in cool air. In most cases, the solid particles resulting from the condensation react with air to form an oxide. The term mist is applied to a finely divided liquid suspended in the atmosphere. Mists are generated by liquids condensing from a vapor back to a liquid or by breaking up a liquid into a dispersed state such as by splashing, foaming or atomizing. Aerosols are also a form of a mist characterized by highly respirable, minute liquid particles. Fibers are solid particles whose length is several times greater than their diameter. Gases are formless fluids that expand to occupy the space or enclosure in which they are confined. Examples are welding gases such as acetylene, nitrogen, helium, and argon; and carbon monoxide generated from the operation of internal combustion engines or by its use as a reducing gas in a heat treating operation. Another example is hydrogen sulfide which is formed wherever there is decomposition of materials containing sulfur under reducing conditions. Liquids change into vapors and mix with the surrounding atmosphere through evaporation. Vapors are the volatile form of substances that are normally in a solid or liquid state at room temperature and pressure. Vapors are the gaseous form of substances which are normally in the solid or liquid state at room temperature and pressure. They are formed by evaporation from a liquid or solid and can be found where parts cleaning and painting takes place and where solvents are used. Chemical Hazards Harmful chemical compounds in the form of solids, liquids, gases, mists, dusts, fumes, and vapors exert toxic effects by inhalation (breathing), absorption (through direct contact with the skin), or ingestion (eating or drinking). Airborne chemical hazards exist as concentrations of mists, vapors, gases, fumes, or solids. Some are toxic through inhalation and some of them irritate the skin on contact; some can be toxic by absorption through the skin or through ingestion, and some are corrosive to living tissue. The degree of worker risk from exposure to any given substance depends on the nature and potency of the toxic effects and the magnitude and duration of exposure. Information on the risk to workers from chemical hazards can be obtained from the Material Safety Data Sheet (MSDS) that OSHA'S Hazard Communication Standard requires be supplied by the manufacturer or importer to the purchaser of all hazardous materials. The MSDS is a summary of the important health, safety, and toxicological information on the chemical or the mixture's ingredients. Other provisions of the Hazard Communication Standard require that all containers of hazardous substances in the workplace have appropriate warning and identification labels. Biological Hazards These include bacteria, viruses, fungi, and other living organisms that can cause acute and chronic infections by entering the body either directly or through breaks in the skin. Occupations that deal with plants or animals or their products or with food and food processing may expose workers to biological hazards. Laboratory and medical personnel also can be exposed to biological hazards. Any occupations that result in contact with bodily fluids pose a risk to workers from biological hazards. In occupations where animals are involved, biological hazards are dealt with by preventing and controlling diseases in the animal population as well as proper care and handling of infected animals. Also, effective personal hygiene, particularly proper attention to minor cuts and scratches, especially those on the hands and forearms, helps keep worker risks to a minimum. In occupations where there is potential exposure to biological hazards, workers should practice proper personal hygiene, particularly hand washing. Hospitals should provide proper ventilation, proper personal protective equipment such as gloves and respirators, adequate infectious waste disposal systems, and appropriate controls including isolation in instances of particularly contagious diseases such as tuberculosis. Physical Hazards These include excessive levels of ionizing and nonionizing electromagnetic radiation, noise, vibration, illumination, and temperature. In occupations where there is exposure to ionizing radiation, time, distance, and shielding are important tools in ensuring worker safety. Danger from radiation increases with the amount of time one is exposed to it; hence, the shorter the time of exposure the smaller the radiation danger. Distance also is a valuable tool in controlling exposure to both ionizing and non-ionizing radiation. Radiation levels from some sources can be estimated by comparing the squares of the distances between the worker and the source. For example, at a reference point of 10 feet from a source, the radiation is 1/100 of the intensity at 1 foot from the source. Shielding also is a way to protect against radiation. The greater the protective mass between a radioactive source and the worker, the lower the radiation exposure. Nonionizing radiation also is dealt with by shielding workers from the source. Sometimes limiting exposure times to nonionizing radiation or increasing the distance is not effective. Laser radiation, for example, cannot be controlled effectively by imposing time limits. An exposure can be hazardous that is faster than the blinking of an eye. Increasing the distance from a laser source may require miles before the energy level reaches a point where the exposure would not be harmful. Noise, another significant physical hazard, can be controlled by various measures. Noise can be reduced by installing equipment and systems that have been engineered, designed, and built to operate quietly; by enclosing or shielding noisy equipment; by making certain that equipment is in good repair and properly maintained with all worn or unbalanced parts replaced; by mounting noisy equipment on special mounts to reduce vibration; and by installing silencers, mufflers, or baffles. Substituting quiet work methods for noisy ones is another significant way to reduce noise, for example, welding parts rather than riveting them. Also, treating floors, ceilings, and walls with acoustical material can reduce reflected or reverberant noise. In addition, erecting sound barriers at adjacent work stations around noisy operations will reduce worker exposure to noise generated at adjacent work stations. It is also possible to reduce noise exposure by increasing the distance between the source and the receiver, by isolating workers in acoustical booths, limiting workers' exposure time to noise, and by providing hearing protection. OSHA requires that workers in noisy surroundings be periodically tested as a precaution against hearing loss. Another physical hazard, radiant heat exposure in factories such as steel mills, can be controlled by installing reflective shields and by providing protective clothing.
Ergonomic Hazards The science of ergonomics studies and evaluates a full range of tasks including, but not limited to, lifting, holding, pushing, walking, and reaching. Many ergonomic problems result from technological changes such as increased assembly line speeds, adding specialized tasks, and increased repetition; some problems arise from poorly designed job tasks. Any of those conditions can cause ergonomic hazards such as excessive vibration and noise, eye strain, repetitive motion, and heavy lifting problems. Improperly designed tools or work areas also can be ergonomic hazards. Repetitive motions or repeated shocks over prolonged periods of time as in jobs involving sorting, assembling, and data entry can often cause irritation and inflammation of the tendon sheath of the hands and arms, a condition known as carpal tunnel syndrome. Ergonomic hazards are avoided primarily by the effective design of a job or jobsite and better designed tools or equipment that meet workers' needs in terms of physical environment and job tasks. Through thorough worksite analyses, employers can set up procedures to correct or control ergonomic hazards by using the appropriate engineering controls (e.g., designing or re-designing work stations, lighting, tools, and equipment); teaching correct work practices (e.g., proper lifting methods); employing proper administrative controls (e.g., shifting workers among several different tasks, reducing production demand, and increasing rest breaks); and, if neces- sary, providing and mandating personal protective equipment. Evaluating working conditions from an ergonomics standpoint involves looking at the total physiological and psychological demands of the job on the worker. Overall, industrial hygienists point out that the benefits of a well-designed, ergonomic work environment can include increased efficiency, fewer accidents, lower operating costs. and more effective use of personnel. In sum, industrial hygiene encompasses a broad spectrum of the working environment. Early in its history OSHA recognized industrial hygiene as an integral part of a healthful work setting. OSHA places a high priority on using industrial hygiene concepts in its health standards and as a tool for effective enforcement of job safety and health regulations. By recognizing and applying the principles of industrial hygiene to the work environment, America's workplaces will become more healthful and safer.
Safety and Health Program Management Guidelines Effective management of worker safety and health protection is a
decisive factor in reducing the extent and severity of work-related
injuries and illnesses and their related costs. To assist employers and
employees in developing effective safety and health programs, OSHA
published recommended Safety and Health Program Management Guidelines
(Federal Register 54(18):3908-3916, January 26, 1989). These voluntary
guidelines apply to all places of employment covered by OSHA. The
guidelines identify four general elements that are critical to the
development of a successful safety and health management program: -- management commitment and employee involvement,
The guidelines recommend specific actions under each of these general elements to achieve an effective safety and health program. A single free copy of the guidelines can be obtained from the U.S. Department of Labor OSHA/OICA Publications. P.O. Box 37535, Washington, DC 20013-7535, by sending a self-addressed mailing label with your request.
State Programs The Occupational Safety and Health Act of 1970 encourages states to develop and operate their own job safety and health plans. States administering occupational safety and health programs through plans approved under section 18(b) of the Act, must adopt standards and enforce requirements that are "at least as effective" as federal requirements. There are currently 25 state plan states: 23 cover the private and public sectors (state and local governments) and 2 cover the public sector only. For more information on State Plan states, see the list of states with approved plans at the end of this publication.
Free Onsite Consultation Consultation assistance is available on request to employers who want help in establishing and maintaining a safe and healthful workplace. Largely funded by OSHA, the service is provided at no cost to the employer. Primarily developed for smaller employers with more hazardous operations, the consultation service is delivered by state government agencies or universities employing professional safety consultants and health consultants. Comprehensive assistance includes an appraisal of all work practices and environmental hazards of the workplace and all aspects of the employer's present job safety and health program. The program is separate from OSHA'S inspection efforts. No penalties are proposed or citations issued for any safety or health problems identified by the consultant. The service is confidential. For more information concerning consultation assistance, see the list of consultation projects at the end of this publication.
Voluntary Protection Program (VPPs) Voluntary Protection Programs (VPPs) and onsite consultation services, when coupled with an effective enforcement program, expand worker protection to help meet the goals of the Act. The three VPPs--Star, Merit, and Demonstration--are designed to recognize outstanding achievement by companies that have successfully incorporated comprehensive safety and health programs into their total management system. They motivate others to achieve excellent safety and health results in the same outstanding way as they establish a cooperative relationship among employers, employees, and OSHA. For additional information on VPPs and how to apply, contact the OSHA area or regional offices listed at the end of this publication.
Training and Education OSHA area offices offer a variety of information services, such as publications, audiovisual aids, technical advice, and speakers for special engagements. The OSHA Training Institute in Des Plaines, IL, provides basic and advanced courses in safety and health for federal and state compliance officers, state consultants, federal agency personnel, and private sector employers, employees, and their representatives. OSHA also provides funds to nonprofit organizations, through grants to conduct workplace training and education in subjects where OSHA believes there is a lack of workplace training. Grants are awarded annually and grant recipients are expected to contribute 20 percent of the total grant cost. For more information on grants, training, and education, contact the OSHA Training Institute, Office of Training and Education, 1555 Times Drive, Des Plaines, IL 60018; telephone (847) 297-4810. For further information on any OSHA program, contact your nearest OSHA area or regional office listed at the end of this publication.
Electronic Information Internet--OSHA standards, interpretations, directives, technical advisors, compliance assistance, and additional information are now on the World Wide Web at http: //www.osha.gov/. CD-ROM--A wide variety of OSHA materials, including standards, interpretations, directives, and more, can be purchased on CD-ROM from the U.S. Government Printing Office. To order, write to the Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954 or telephone (202)512-1800. Specify OSHA Regulations, Documents, and Technical Information on CD-ROM (ORDT), GPO Order No. S/N 729-013-00000-5. The price is $38 per year ($47.50 foreign); $15 per single copy ($18.75 foreign).
Emergencies For life-threatening situations, call (800) 321-OSHA. Complaints will go immediately to the nearest OSHA area or state office for help. For further information on any OSHA program, contact your nearest OSHA area or regional office listed at the end of this publication.
Single, free copies of the following publications can be obtained from
the U.S. Department of Labor, OSHA/OICA Publications, P.O. Box 37535,
Washington, DC 20013-7535. Send a Self-addressed mailing label with your
request.
All About OSHA -- OSHA 2056 Ergonomics: The Study of work -- OSHA 3125. Order No. 029-016-00
124-7; cost $1.00
States with Approved Plans
OSHA Consultation Project Directory State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Telephone Arizona . . . . . . . . . . . . . . . . . . . . . . . . . . (602) 542-5795 Arkansas . . . . . . . . . . . . . . . . . . . . . . . . . .(501) 682-4522 California . . . . . . . . . . . . . . . . . . . . . . . . .(415) 982-8515 Colorado . . . . . . . . . . . . . . . . . . . . . . . . . .(970) 491-6151 Connecticut . . . . . . . . . . . . . . . . . . . . . . . . (860) 566-4550 Delaware . . . . . . . . . . . . . . . . . . . . . . . . . .(302) 761-8219 District of Columbia . . . . . . . . . . . . . . . . . . . .(202) 576-6339 Florida . . . . . . . . . . . . . . . . . . . . . . . . . . (904) 488-3044 Georgia . . . . . . . . . . . . . . . . . . . . . . . . . . (404) 894-2646 Guam . . . . . . . . . . . . . . . . . . . . . . . . . 011 (671) 475-0136 Hawaii . . . . . . . . . . . . . . . . . . . . . . . . . . . (808) 586-9100 Idaho . . . . . . . . . . . . . . . . . . . . . . . . . . . .(208) 385-3283 Illinois . . . . . . . . . . . . . . . . . . . . . . . . . . (312) 814-2337 Indiana . . . . . . . . . . . . . . . . . . . . . . . . . . .(317) 232-2688 Iowa . . . . . . . . . . . . . . . . . . . . . . . . . . . . (515) 281-5352 Kansas . . . . . . . . . . . . . . . . . . . . . . . . . . . (913) 296-7476 Kentucky . . . . . . . . . . . . . . . . . . . . . . . . . . (502) 564-6895 Louisiana . . . . . . . . . . . . . . . . . . . . . . . . . .(504) 342-9601 Maine . . . . . . . . . . . . . . . . . . . . . . . . . . . .(207) 624-6460 Maryland . . . . . . . . . . . . . . . . . . . . . . . . . . (410) 333-4210 Massachusetts . . . . . . . . . . . . . . . . . . . . . . . .(617) 727-3982 Michigan . . . . . . . . . . . . . . . . . . . . . . . . (H) (517) 332-8250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (S) (517) 322-1809 Minnesota . . . . . . . . . . . . . . . . . . . . . . . . . .(612) 297-2393 Mississippi . . . . . . . . . . . . . . . . . . . . . . . . .(601) 987-3981 Missouri . . . . . . . . . . . . . . . . . . . . . . . . . . (573) 751-3403 Montana . . . . . . . . . . . . . . . . . . . . . . . . . . .(406) 444-6418 Nebraska . . . . . . . . . . . . . . . . . . . . . . . . . . (402) 471-4717 Nevada . . . . . . . . . . . . . . . . . . . . . . . . . . . (702) 486-5016 New Hampshire . . . . . . . . . . . . . . . . . . . . . . . .(603) 271-2024 New Jersey . . . . . . . . . . . . . . . . . . . . . . . . . (609) 292-2424 New Mexico . . . . . . . . . . . . . . . . . . . . . . . . . (505) 827-4230 New York . . . . . . . . . . . . . . . . . . . . . . . . . . (518) 457-2481 North Carolina . . . . . . . . . . . . . . . . . . . . . . . (919) 662-4644 North Dakota . . . . . . . . . . . . . . . . . . . . . . . . (701) 328-5188 Ohio . . . . . . . . . . . . . . . . . . . . . . . . . . . . (614) 644-2246 Oklahoma . . . . . . . . . . . . . . . . . . . . . . . . . . (405) 528-1500 Oregon . . . . . . . . . . . . . . . . . . . . . . . . . . . (503) 378-3272 Pennsylvania . . . . . . . . . . . . . . . . . . . . . . . . (412) 357-2561 Puerto Rico . . . . . . . . . . . . . . . . . . . . . . . . .(809) 754-2188 Rhode Island . . . . . . . . . . . . . . . . . . . . . . . . (401) 277-2438 South Carolina . . . . . . . . . . . . . . . . . . . . . . . (803) 734-9614 South Dakota . . . . . . . . . . . . . . . . . . . . . . . . (605) 688-4101 Tennessee . . . . . . . . . . . . . . . . . . . . . . . . . .(615) 741-7036 Texas . . . . . . . . . . . . . . . . . . . . . . . . . . . .(512) 440-3834 Utah . . . . . . . . . . . . . . . . . . . . . . . . . . . . (801) 530-6868 Vermont . . . . . . . . . . . . . . . . . . . . . . . . . . .(802) 828-2765 Virginia . . . . . . . . . . . . . . . . . . . . . . . . . . (804) 786-6359 Virgin Islands . . . . . . . . . . . . . . . . . . . . . . . (809) 772-1315 Washington . . . . . . . . . . . . . . . . . . . . . . . . . (360) 902-5638 West Virginia . . . . . . . . . . . . . . . . . . . . . . . .(304) 558-7890 Wisconsin . . . . . . . . . . . . . . . . . . . . . . . .(H) (6O8) 266-8579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (S) (414) 521-5063 Wyoming . . . . . . . . . . . . . . . . . . . . . . . . . . (307) 777-7700 (H) - Health (S) - Safety OSHA Area Offices Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephone Albany, NY . . . . . . . . . . . . . . . . . . . . . . . . . (518) 464-6742 Albuquerque, NM . . . . . . . . . . . . . . . . . . . . . . .(505) 248-5302 Allentown, PA . . . . . . . . . . . . . . . . . . . . . . . .(610) 776-0592 Anchorage, AK . . . . . . . . . . . . . . . . . . . . . . . .(907) 271-5152 Appleton, WI . . . . . . . . . . . . . . . . . . . . . . . . (414) 734-4521 Austin, TX . . . . . . . . . . . . . . . . . . . . . . . . . (512) 916-5783 Avenel, NJ . . . . . . . . . . . . . . . . . . . . . . . . . (908) 750-3270 Baltimore, MD . . . . . . . . . . . . . . . . . . . . . . . .(410) 962-2840 Bangor, ME . . . . . . . . . . . . . . . . . . . . . . . . . (207) 941-8177 Baton Rouge, LA . . . . . . . . . . . . . . . . . . . . . . .(504) 389-0474 Bayside. NY . . . . . . . . . . . . . . . . . . . . . . . . (718) 279-9060 Bellevue, WA . . . . . . . . . . . . . . . . . . . . . . . . (206) 553-7520 Billings, MT . . . . . . . . . . . . . . . . . . . . . . . . (406) 247-7494 Birmingham, AL . . . . . . . . . . . . . . . . . . . . . . . (205) 731-1534 Bismarck, ND . . . . . . . . . . . . . . . . . . . . . . . . (701) 250-4521 Boise, ID . . . . . . . . . . . . . . . . . . . . . . . . . .(208) 334-1867 Bowmansville, NY . . . . . . . . . . . . . . . . . . . . . . (716) 684-3891 Braintree, MA . . . . . . . . . . . . . . . . . . . . . . . .(617) 565-6924 Bridgeport, CT . . . . . . . . . . . . . . . . . . . . . . . (203) 579-5581 Calumet City, IL . . . . . . . . . . . . . . . . . . . . . . (708) 891-3800 Carson City, NV . . . . . . . . . . . . . . . . . . . . . . .(702) 885-6963 Charleston, WV . . . . . . . . . . . . . . . . . . . . . . . (304) 347-5937 Cincinnati, OH . . . . . . . . . . . . . . . . . . . . . . . (513) 841-4132 Cleveland. OH . . . . . . . . . . . . . . . . . . . . . . . .(216) 522-3818 Columbia, SC . . . . . . . . . . . . . . . . . . . . . . . . (803) 765-5904 Columbus, OH . . . . . . . . . . . . . . . . . . . . . . . . (614) 469-5582 Concord, NH . . . . . . . . . . . . . . . . . . . . . . . . .(603) 225-1629 Corpus Christi, TX . . . . . . . . . . . . . . . . . . . . . (512) 888-3420 Dallas, TX . . . . . . . . . . . . . . . . . . . . . . . . . (214) 320-2400 Denver, CO . . . . . . . . . . . . . . . . . . . . . . . . . (303) 844-5285 Des Plaines, IL . . . . . . . . . . . . . . . . . . . . . . .(847) 803-4800 Des Moines, IA . . . . . . . . . . . . . . . . . . . . . . . (515) 284-4794 Englewood, CO . . . . . . . . . . . . . . . . . . . . . . . .(303) 843-4500 Erie, PA . . . . . . . . . . . . . . . . . . . . . . . . . . (814) 833-5758 Fort Lauderdale, FL . . . . . . . . . . . . . . . . . . . . .(305) 424-0242 Fort Worth, TX . . . . . . . . . . . . . . . . . . . . . . . (817) 581-7303 Frankfort, KY . . . . . . . . . . . . . . . . . . . . . . . .(502) 227-7024 Harrisburg, PA . . . . . . . . . . . . . . . . . . . . . . . (717) 782-3902 Hartford, CT . . . . . . . . . . . . . . . . . . . . . . . . (203) 240-3152 Hasbrouck Heights, NJ . . . . . . . . . . . . . . . . . . . .(201) 288-1700 Guaynabo, PR . . . . . . . . . . . . . . . . . . . . . . . . (787) 277-1560 Honolulu, HI . . . . . . . . . . . . . . . . . . . . . . . . (808) 541-2685 Houston, TX . . . . . . . . . . . . . . . . . . . . . . . . .(713) 286-0583 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (713) 591-2438 Indianapolis, IN . . . . . . . . . . . . . . . . . . . . . . (317) 226-7290 Jackson, MS . . . . . . . . . . . . . . . . . . . . . . . . .(601) 965-4606 Jacksonville, FL . . . . . . . . . . . . . . . . . . . . . . (904) 232-2895 Kansas City, MO . . . . . . . . . . . . . . . . . . . . . . .(816) 483-9531 Lansing, MI . . . . . . . . . . . . . . . . . . . . . . . . .(517) 377-1892 Little Rock. AR . . . . . . . . . . . . . . . . . . . . . . .(501) 324-6291 Lubbock. TX . . . . . . . . . . . . . . . . . . . . . . . . .(806) 743-7681 Madison. WI . . . . . . . . . . . . . . . . . . . . . . . . .(608) 264-5388 Marlton, NJ . . . . . . . . . . . . . . . . . . . . . . . . .(609) 757-5181 Methuen, MA . . . . . . . . . . . . . . . . . . . . . . . . .(6l7) 565-8110 Milwaukee, WI . . . . . . . . . . . . . . . . . . . . . . . .(414) 297-3315 Minneapolis, MN . . . . . . . . . . . . . . . . . . . . . . .(651) 664-5460 Mobile. AL . . . . . . . . . . . . . . . . . . . . . . . . . (334) 441-6131 Nashville, TN . . . . . . . . . . . . . . . . . . . . . . . .(615) 781-5423 New York, NY . . . . . . . . . . . . . . . . . . . . . . . . (212) 466-2482 Norfolk, VA . . . . . . . . . . . . . . . . . . . . . . . . .(804) 441-3820 North Aurora, IL . . . . . . . . . . . . . . . . . . . . . . (630) 896-8700 Oklahoma City, OK . . . . . . . . . . . . . . . . . . . . . .(405) 231-5351 Omaha. NE . . . . . . . . . . . . . . . . . . . . . . . . . .(402) 221-3182 Parsippany, NJ . . . . . . . . . . . . . . . . . . . . . . . (201) 263-1003 Peoria, IL . . . . . . . . . . . . . . . . . . . . . . . . . (309) 671-7033 Philadelphia, PA . . . . . . . . . . . . . . . . . . . . . . (215) 597-4955 Phoenix, AZ . . . . . . . . . . . . . . . . . . . . . . . . .(602) 640-2007 Pittsburgh, PA . . . . . . . . . . . . . . . . . . . . . . . (412) 644-2903 Portland, OR . . . . . . . . . . . . . . . . . . . . . . . . (503) 326-2251 Providence, RI . . . . . . . . . . . . . . . . . . . . . . . (401) 528-4669 Raleigh, NC . . . . . . . . . . . . . . . . . . . . . . . . .(919) 856-4770 Salt Lake City, UT . . . . . . . . . . . . . . . . . . . . . (801) 524-5080 San Francisco, CA . . . . . . . . . . . . . . . . . . . . . .(415) 744-7120 Savannah, GA . . . . . . . . . . . . . . . . . . . . . . . . (912) 652-4393 Smyrna, GA . . . . . . . . . . . . . . . . . . . . . . . . . (404) 984-8700 Springfield, MA . . . . . . . . . . . . . . . . . . . . . . .(413) 785-0123 St. Louis, MO . . . . . . . . . . . . . . . . . . . . . . . .(314) 425-4249 Syracuse, NY . . . . . . . . . . . . . . . . . . . . . . . . (315) 451-0808 Tampa, FL . . . . . . . . . . . . . . . . . . . . . . . . . .(813) 626-1177 Tarrytown, NY . . . . . . . . . . . . . . . . . . . . . . . .(914) 524-7510 Toledo, OH . . . . . . . . . . . . . . . . . . . . . . . . . (419) 259-7542 Tucker, GA . . . . . . . . . . . . . . . . . . . . . . . . . (770) 493-6644 Westbury, NY . . . . . . . . . . . . . . . . . . . . . . . . (516) 334-3344 Wichita, KS . . . . . . . . . . . . . . . . . . . . . . . . .(316) 269-6644 Wilkes-Barre, PA . . . . . . . . . . . . . . . . . . . . . . (717) 826-6538 Wilmington, DE . . . . . . . . . . . . . . . . . . . . . . . (3O2) 573-6115 OSHA Regional Offices
Region I |
(CT,* MA, ME, NH, RI, VT*) JKF Federal Building Room E-340 Boston, MA 02203 Telephone: (617) 565-9860 Region II |
(NJ, NY,* PR,* VI*) 201 Varick Street Room 670 New York, NY 10014 Telephone: (212) 337-2378 Region III | (DC, DE, MD,* PA, VA,* WV) Gateway Building, Suite 2100 3535 Market Street Philadelphia, PA 19104 Telephone: (215) 596-1201 Region IV |
(AL, FL, GA, KY,* MS, NC, SC,* TN*) Atlanta Federal Center 61 Forsyth Street, SW, Room 6T50 Atlanta, GA 30303 Telephone: (404) 562-2300 Region V |
(IL, IN,* MI,* MN,* OH, WI) 230 South Dearborn Street Room 3244 Chicago, IL 60604 Telephone: (312) 353-2220 Region VI | (AR, LA, NM,* OK, TX) 525 Griffin Street Room 602 Dallas, TX 75202 Telephone: (2 14) 767-4731 Region VII |
(IA,* KS, MO, NE) City Center Square 1100 Main Street, Suite 800 Kansas City, MO 64105 Telephone: (8 16) 426-5861 Region VIII |
(CO, MT, ND, SD, UT,* WY*) 1999 Broadway, Suite 1690 Denver, CO 80202-5716 Telephone: (303) 844-1600 Region IX | (American Samoa, AZ,* CA,* Guam, HI,* NV,* Trust Territories of the Pacific) 71 Stevenson Street Room 420 San Francisco, CA 94105 Telephone: (4 15) 975-4310 Region X | (AK,* ID, OR,* WA*) 1111 Third Avenue Suite 715 Seattle, WA 98101-3212 Telephone: (206) 553-5930
|