|
|
Category
|
Description
|
Hazard
|
Standard
|
Corrective Action
|
|
VIEW
|
PPE |
This photograph shows an employee without a hard hat exposed to overhead hazards during a tree trimming operation. |
Struck by |
1910.135(a) |
Workers should wear hard hats when they are exposed to the hazard of falling debris. |
|
VIEW
|
PPE |
Photo of a lanyard that was used by employees and is extremely frayed. |
fall |
1910.67(c)(2)(v) |
Replace lanyard with one that is not worn. Employers need to check fall protection related equipment daily before it is used to ensure that it is still suitable for use |
|
VIEW
|
PPE |
Employees power sanding composite aircraft parts. Paints used contained < 2% cadmium |
1 - Employee exposed to noise levels in excess of the PEL, and audiometric testing not conducted.
2 - Employees exposed to cadmium in excess of the PEL. |
1910.95 & 1910.1027 |
1 - Audiometric testing performed along with employee training, and employees were provided with adequate PPE.
2 - Implemented engineering and work practice controls. |
|
VIEW
|
PPE |
Employee is shown on Phosphate Coating Line wearing prescription safety glasses with detachable side shields which had large openings where they slid onto the temple pieces. |
An employee wearing Prescription Safety Glasses, with detachable side shields having large openings, was exposed to chemicals splashing into her eyes. |
1910.133(a)(3) |
Either provide prescription safety glasses with permanent side shields, or require the wearing of splash-resistant chemical goggles over employee's prescription glasses. |
|
VIEW
|
PPE |
3M half face respirator |
A 3M half face respirator was in use with a written respirator protection program, medical evaluations and respirator training. |
29 CFR 1910.134(c)(1)
29 CFR 1910.134(e)(1)
29 CFR 1910.134(k)(1) |
Develop a written site-specific respirator program, provide medical evaluations and respirator training. |
